« Shimano Dura-Ace Track » : différence entre les versions

De Cyclopédia
Aller à la navigation Aller à la recherche
← Modification précédenteModification suivante →
Louison (discussion | contributions)
428 modifications
Aucun résumé des modifications
Louison (discussion | contributions)
428 modifications
Aucun résumé des modifications
Ligne 2 : Ligne 2 :
As such, I am going to try to squish identical groups with different names under the same category.
As such, I am going to try to squish identical groups with different names under the same category.


= Dura-Ace Track (1972<ref>{{cite web |url= https://www.disraeligears.co.uk/site/shimano_bicycle_parts_december_1972_-_page_4.html |title= Page 4 of Shimano Bicycle Parts December 1972 |publisher= disraeligears.co.uk |access-date= 25/04/2024 |archive-date=  |archive-url= |url-status= live }}</ref>-1978<ref>{{cite web |url= https://www.disraeligears.co.uk/site/shimano_bicycle_system_components_december_1978_-_page_22.html |title= Page 4 of Shimano Bicycle System Components (December 1978) |publisher= disraeligears.co.uk |access-date= 25/04/2024 |archive-date=  |archive-url= |url-status= live }}</ref>)=
= Dura-Ace Track (1972<ref>{{cite web |url= https://www.disraeligears.co.uk/site/shimano_bicycle_parts_december_1972_-_page_4.html |title= Page 4 of Shimano Bicycle Parts December 1972 |publisher= disraeligears.co.uk |access-date= 25/04/2024 |archive-date=  |archive-url=   }}</ref>-1978<ref>{{cite web |url= https://www.disraeligears.co.uk/site/shimano_bicycle_system_components_december_1978_-_page_22.html |title= Page 4 of Shimano Bicycle System Components (December 1978) |publisher= disraeligears.co.uk |access-date= 25/04/2024 |archive-date=  |archive-url= }}</ref>)=


=== GA-100 ===
=== GA-100 ===
Ligne 123 : Ligne 123 :
= Dura-Ace 7600 (1986-1994) =
= Dura-Ace 7600 (1986-1994) =


=== FC-7600 ===
=== FC-7600<ref>{{cite web |url= https://si.shimano.com/en/pdfs/si/1620A/SI-1620A-001-00-ENG.pdf |title= Service Instructions for FC-7600 |publisher= shimano.com |access-date= 29/04/2024 |archive-date=  |archive-url= }}</ref> ===


:'''BCD''': 144
:'''BCD''': 144
Ligne 131 : Ligne 131 :
:'''Torque figure''': 35-50nm
:'''Torque figure''': 35-50nm


=== BB-7600 ===
=== BB-7600<ref>{{cite web |url= https://si.shimano.com/en/pdfs/ev/BB-7400_7600-0729/EV-BB-7400_7600-0729.pdf |title= Exploded view of BB-7600 |publisher= shimano.com |access-date= 29/04/2024 |archive-date=  |archive-url= }}</ref> ===
Caged ball bearings. Available in BSC, FR or ITA. 109mm
Caged ball bearings. Available in BSC, FR or ITA. 109mm


Ligne 141 : Ligne 141 :
:'''Tool''':  
:'''Tool''':  


=== BB-7610 ===
=== BB-7610<ref>{{cite web |url= https://si.shimano.com/en/pdfs/si/1620A/SI-1620A-001-00-ENG.pdf |title= Service Instructions for BB-7610 |publisher= shimano.com |access-date= 29/04/2024 |archive-date=  |archive-url= }}</ref> ===
Industrial ball bearings version of BB-7600. Different specifications listed.
Industrial ball bearings version of BB-7600. Different specifications listed.


Ligne 149 : Ligne 149 :
:'''Tool''': TL-UN74-S
:'''Tool''': TL-UN74-S


=== HB-7600 (Small flange) ===
=== HB-7600 (Front<ref>{{cite web |url= https://si.shimano.com/en/pdfs/si/23T0A/SI-23T0A-001-ENG.pdf |title= Service Instructions for HB-7600-F |publisher= shimano.com |access-date= 29/04/2024 |archive-date=  |archive-url=  }}</ref> and Rear<ref>{{cite web |url= https://si.shimano.com/en/pdfs/si/23U0A/SI-23U0A-001-ENG.pdf |title= Service Instructions for HB-7600-R |publisher= shimano.com |access-date= 29/04/2024 |archive-date=  |archive-url=  }}</ref>) (Small Flange)===
 


:'''No. of Spoke Holes''': 36, 32, 28 or 24
:'''No. of Spoke Holes''': 36, 32, 28 or 24
Ligne 155 : Ligne 156 :
:'''Rear Overlock nut dimensions''': 110mm or 120mm
:'''Rear Overlock nut dimensions''': 110mm or 120mm


=== HB-7600 (Large flange) ===
=== HB-7600 (Front<ref>{{cite web |url= https://si.shimano.com/en/pdfs/si/23T0A/SI-23T0A-001-ENG.pdf |title= Service Instructions for HB-7600-F |publisher= shimano.com |access-date= 29/04/2024 |archive-date=  |archive-url=  }}</ref> and Rear<ref>{{cite web |url= https://si.shimano.com/en/pdfs/si/23U0A/SI-23U0A-001-ENG.pdf |title= Service Instructions for HB-7600-R |publisher= shimano.com |access-date= 29/04/2024 |archive-date=  |archive-url=  }}</ref>) (Large Flange)===


:'''No. of Spoke Holes''': 36, 32, 28 or 24
:'''No. of Spoke Holes''': 36, 32, 28 or 24
Ligne 167 : Ligne 168 :
:'''Available Teeth''': 13, 14, 15 or 16 teeth
:'''Available Teeth''': 13, 14, 15 or 16 teeth


=== HP-7600 ===
=== HP-7600<ref>{{cite web |url= https://si.shimano.com/en/pdfs/si/N-93/SI-N-93-000-00-ENG.pdf |title= Service Instructions for HP-7600 |publisher= shimano.com |access-date= 29/04/2024 |archive-date=  |archive-url= }}</ref> ===


:'''Thread Dimensions''': BSC or FR
:'''Thread Dimensions''': BSC or FR<ref>{{cite web |url= https://si.shimano.com/en/pdfs/ev/HP-7600-0724/EV-HP-7600-0724E.pdf |title= Exploded view of HP-7600 |publisher= shimano.com |access-date= 29/04/2024 |archive-date=  |archive-url= }}</ref>
:'''Lock Washer type''':  
:'''Lock Washer type''':  
:'''A''': 30mm (JIS) or 30.2mm
:'''A''': 30mm (JIS) or 30.2mm
Ligne 181 : Ligne 182 :




= Dura-Ace 7700 (2005-2024) =
= Dura-Ace 7700 (2005-2022<ref>{{cite web |archive-url= https://web.archive.org/web/20240429160639/https://paul-lange-ukraine.com/images/upload/files_materials/4/68/shimano-2022-en-pdf.pdf |title= 2022 Shimano Bicycle Components |archive-date= 29/04/2024 }}</ref>) =


=== FC-7710 ===
=== FC-7710<ref>{{cite web |url= https://si.shimano.com/en/pdfs/si/16S0A/SI-16S0A-000-ENG.pdf |title= Service Instructions for FC-7710 |publisher= shimano.com |access-date= 29/04/2024 |archive-date=  |archive-url= }}</ref> ===


:'''BCD''': 144
:'''BCD''': 144
Ligne 192 : Ligne 193 :
:'''Cap Torque figure''': 5-7nm
:'''Cap Torque figure''': 5-7nm


=== BB-7700 ===
=== BB-7700<ref>{{cite web |url= https://si.shimano.com/en/pdfs/si/1TG0H/SI-1TG0H-001-ENG.pdf |title= Service Instructions for BB-7700 |publisher= shimano.com |access-date= 29/04/2024 |archive-date=  |archive-url= }}</ref> ===


Caged ball bearings.  
Caged ball bearings.  
Ligne 203 : Ligne 204 :
:'''Tool''': TL-UN74-S
:'''Tool''': TL-UN74-S


=== BB-7710 ===
=== BB-7710<ref>{{cite web |url= https://si.shimano.com/en/pdfs/si/16S0A/SI-16S0A-000-ENG.pdf |title= Service Instructions for BB-7710 |publisher= shimano.com |access-date= 29/04/2024 |archive-date=  |archive-url= }}</ref> ===


Industrial ball bearings version of BB-7700. Different specifications listed.
Industrial ball bearings version of BB-7700. Different specifications listed.
Ligne 209 : Ligne 210 :
:'''Available Threadings''': BSC
:'''Available Threadings''': BSC


=== HB-7710 ===
=== HB-7710 (Front<ref>{{cite web |url= https://si.shimano.com/en/pdfs/si/23T0A/SI-23T0A-001-ENG.pdf |title= Service Instructions for HB-7710-F |publisher= shimano.com |access-date= 29/04/2024 |archive-date=  |archive-url= }}</ref> and Rear<ref>{{cite web |url= https://si.shimano.com/en/pdfs/si/23U0A/SI-23U0A-001-ENG.pdf |title= Service Instructions for HB-7710-R |publisher= shimano.com |access-date= 29/04/2024 |archive-date=  |archive-url=  }}</ref>)===


Small Flange Wheel Hubs.
Small Flange Wheel Hubs.
Ligne 217 : Ligne 218 :
:'''Rear Overlock nut dimensions''': 110mm or 120mm
:'''Rear Overlock nut dimensions''': 110mm or 120mm


=== HP-7410 ===
=== HP-7410<ref>{{cite web |url= https://si.shimano.com/en/pdfs/si/78A0B/SI-78A0B-000-ENG.PDF |title= Service Instructions for HP-7410 |publisher= shimano.com |access-date= 29/04/2024 |archive-date=  |archive-url= }}</ref> ===


:'''Thread Dimensions''': BSC or FR
:'''Thread Dimensions''': BSC or FR

Version du 29 avril 2024 à 16:46

In 1981 Shimano changed their nomenclature to better represent the components' name. They have done so before but the change from 1981 stuck and is still used as of today. As such, I am going to try to squish identical groups with different names under the same category.

Dura-Ace Track (1972[1]-1978[2])

GA-100

BCD:
Avail. Crank Lengths: 165mm, (167.5mm), 170mm, (172,5mm) or 175mm
Pedal Thread: 9/16"x20
Chain size: 1/2" x 1/8"
Torque figure:

GB-100

Spindle type: Square
Spindle Length: 112mm
Chain Line: 1/2" x 1/8"
Available Threadings: BSC, FR or ITA
Torque figure:
Tool:

HA-300 (previously called H-741 or H-841 for front and rear wheel hubs respectively)

No. of Spoke Holes: 36, 32 or 28
Front Overlock nut dimensions: 100mm
Rear Overlock nut dimensions: 110mm or 120mm

FA-200 (previously called FR-912>FR-916)

Chain size: 1/2" x 1/8"
Thread: 1,37"x24TPI
Available Teeth: 13, 14, 15 or 16 teeth

UA-200 (Previously called K-902)

HS-741 or HS-841

Small Flange Wheel Hubs made unavailable from 1975 onwards.


Dura-Ace 7000 (or 10) (1977-1981)

This was Shimano's attempt at revolutionising track racing. "The 10mm pitch system reduces the overall weight and size of the components"

FC-7000 (previously called GA-110)

BCD:
Avail. Crank Lengths: 165mm or 170mm
Pedal Thread: 9/16"x20
Chain size: 10mmx3mm
Torque figure:

HB-7020 (previously called HA-310)

No. of Spoke Holes: 36, 32 or 28
Front Overlock nut dimensions: 100mm
Rear Overlock nut dimensions: 110mm or 120mm

CN-7000 (previously called QA-100)

Chain size: 10mmx3mm

SS-7000 (previously called FA-210)

Chain size: 10mmx3mm
Thread: BC33x24TPI
Available Teeth: 14, 15 or 16 teeth


Dura-Ace 7500 (1981-1984)

FC-7500

BCD: 144
Avail. Crank Lengths: 165mm, 167.5mm or 170mm
Pedal Thread: 9/16"x20 or 14x1,25
Chain size: 1/2" x 1/8"
Torque figure:

BB-7500

Spindle type: Square
Spindle Length: 107mm (BSC) or 109mm (ITA)
Chain Line:
Available Threadings: BSC, FR or ITA
Torque figure:
Tool:

HB-7520

Large Flange Wheel Hubs.

No. of Spoke Holes: 36, 32 or 28
Front Overlock nut dimensions: 100mm
Rear Overlock nut dimensions: 110mm or 120mm

SS-7500

Chain size: 1/2" x 1/8"
Thread: 1,37"x24TPI
Available Teeth: 13, 14, 15 or 16 teeth

HP-7500

Thread Dimensions: BSC or FR
Lock Washer type:
A:
B:
C:
D:
l1: 21mm
l2: 11.5mm
L:


Dura-Ace 7600 (1986-1994)

FC-7600[3]

BCD: 144
Avail. Crank Lengths: 165mm, 167.5mm, 170mm, 172.5mm or 175mm
Pedal Thread: 9/16"x20TPI
Chain size: 1/2" x 1/8" or 1/2" x 3/32"
Torque figure: 35-50nm

BB-7600[4]

Caged ball bearings. Available in BSC, FR or ITA. 109mm

Spindle type: Square
Spindle Length: 109mm
Chain Line:
Available Threadings: BSC, FR or ITA
Torque figure:
Tool:

BB-7610[5]

Industrial ball bearings version of BB-7600. Different specifications listed.

Chain Line: 42.5mm
Available Threading: BSC, NJS or ITA
Torque figure: 50-70nm
Tool: TL-UN74-S

HB-7600 (Front[6] and Rear[7]) (Small Flange)

No. of Spoke Holes: 36, 32, 28 or 24
Front Overlock nut dimensions: 100mm
Rear Overlock nut dimensions: 110mm or 120mm

HB-7600 (Front[8] and Rear[9]) (Large Flange)

No. of Spoke Holes: 36, 32, 28 or 24
Front Overlock nut dimensions: 100mm
Rear Overlock nut dimensions: 110mm or 120mm

SS-7600

Chain size: 1/2" x 1/8" or 1/2" x 3/32"
Thread: 1,37"x24TPI
Available Teeth: 13, 14, 15 or 16 teeth

HP-7600[10]

Thread Dimensions: BSC or FR[11]
Lock Washer type:
A: 30mm (JIS) or 30.2mm
B: 27mm (JIS) or 26.4mm
C:
D:
l1: 21mm
l2: 11.5mm
L: H+37.6mm


Dura-Ace 7700 (2005-2022[12])

FC-7710[13]

BCD: 144
Avail. Crank Lengths: 165mm, 167.5mm, 170mm, 172.5mm or 175mm
Pedal Thread: 9/16"x20TPI
Chain size: 1/2" x 1/8" or 1/2" x 3/32"
Torque figure: 35-50nm
Cap Torque figure: 5-7nm

BB-7700[14]

Caged ball bearings.

Spindle type: Octalink
Spindle Length: 109.5mm
Chain Line: 42.5mm
Available Threadings: BSC or ITA
Torque figure: 50-70nm
Tool: TL-UN74-S

BB-7710[15]

Industrial ball bearings version of BB-7700. Different specifications listed.

Available Threadings: BSC

HB-7710 (Front[16] and Rear[17])

Small Flange Wheel Hubs.

No. of Spoke Holes: 36, 32, 28 or 24
Front Overlock nut dimensions: 100mm
Rear Overlock nut dimensions: 110mm or 120mm

HP-7410[18]

Thread Dimensions: BSC or FR
Lock Washer type: Small Notch or Notch
A: 30mm (JIS) or 30.2mm
B: 27mm (JIS) or 26.4mm
C: 22.3mm
D: 32mm
l1: 24.1mm
l2: 13.5mm
L: H+37.6mm


Track-specific Frame Parts

N-103 (12/1972-1974)

Standard Track Fork Ends.

NC-100 (1975-1981)

Low-er end Track Fork Ends.

NC-200 (12/1978-1981)

High-er end Track Fork Ends. Appeared first in a catalog dated December 1978 .

FE-SF10 (1981)

Low-er end Track Fork Ends. (Most likely a rename of the NC-100 to meet more appropriately their newly made nomenclature)

FE-UF10 (1981)

High-er end Track Fork Ends. (Most likely a rename of the NC-200 to meet more appropriately their newly made nomenclature)

Sources

This template displays the list of footnotes at the end of an article and provides additional formatting and organizing options. After hitting "Apply changes" and turning back to VE read mode, you will not see the references list. After hitting "Publish page" and turning back to normal read mode the reference list will reappear with the changes applied, see T53146.

Paramètres du modèle

La mise en forme sur une seule ligne est préférée pour ce modèle.

ParamètreDescriptionTypeÉtat
Columns / Column width1 colwidth

Two modes supported. First mode (deprecated): integer number of fixed columns into which the reference list is to be rendered. Second mode: typographic unit of measurement such as 'em', specifying the width for the reference list columns, e.g. '33em'; spaced '33&nbsp;em' will not be recognized

Par défaut
1 if < 11 references; otherwise 30em
Chaînefacultatif
Liststyleliststyle

Specifies the style used when the reference list is enumerated; accepts any valid CSS value defined for list-style-type

Valeurs suggérées
none disc circle square decimal decimal-leading-zero lower-roman upper-roman lower-alpha upper-alpha lower-greek armenian georgian
Par défaut
decimal
Chaînefacultatif
Groupgroup

Group is an identifier which restricts the references that are shown. Without this parameter, this template only shows references with no group identifier. With a group identifier specified, only references with a matching group identifier are handled. The rest are left alone.

Chaînefacultatif
List of referencesrefs

Provides a space to define named references for use in the article. References defined in this space are not shown unless used somewhere in the article.

Chaînefacultatif
  1. ↑ Erreur Lua dans Module:Citation/CS1/Configuration à la ligne 2058 : attempt to index field '?' (a nil value).
  2. ↑ Erreur Lua dans Module:Citation/CS1/Configuration à la ligne 2058 : attempt to index field '?' (a nil value).
  3. ↑ Erreur Lua dans Module:Citation/CS1/Configuration à la ligne 2058 : attempt to index field '?' (a nil value).
  4. ↑ Erreur Lua dans Module:Citation/CS1/Configuration à la ligne 2058 : attempt to index field '?' (a nil value).
  5. ↑ Erreur Lua dans Module:Citation/CS1/Configuration à la ligne 2058 : attempt to index field '?' (a nil value).
  6. ↑ Erreur Lua dans Module:Citation/CS1/Configuration à la ligne 2058 : attempt to index field '?' (a nil value).
  7. ↑ Erreur Lua dans Module:Citation/CS1/Configuration à la ligne 2058 : attempt to index field '?' (a nil value).
  8. ↑ Erreur Lua dans Module:Citation/CS1/Configuration à la ligne 2058 : attempt to index field '?' (a nil value).
  9. ↑ Erreur Lua dans Module:Citation/CS1/Configuration à la ligne 2058 : attempt to index field '?' (a nil value).
  10. ↑ Erreur Lua dans Module:Citation/CS1/Configuration à la ligne 2058 : attempt to index field '?' (a nil value).
  11. ↑ Erreur Lua dans Module:Citation/CS1/Configuration à la ligne 2058 : attempt to index field '?' (a nil value).
  12. ↑ Erreur Lua dans Module:Citation/CS1/Configuration à la ligne 2058 : attempt to index field '?' (a nil value).
  13. ↑ Erreur Lua dans Module:Citation/CS1/Configuration à la ligne 2058 : attempt to index field '?' (a nil value).
  14. ↑ Erreur Lua dans Module:Citation/CS1/Configuration à la ligne 2058 : attempt to index field '?' (a nil value).
  15. ↑ Erreur Lua dans Module:Citation/CS1/Configuration à la ligne 2058 : attempt to index field '?' (a nil value).
  16. ↑ Erreur Lua dans Module:Citation/CS1/Configuration à la ligne 2058 : attempt to index field '?' (a nil value).
  17. ↑ Erreur Lua dans Module:Citation/CS1/Configuration à la ligne 2058 : attempt to index field '?' (a nil value).
  18. ↑ Erreur Lua dans Module:Citation/CS1/Configuration à la ligne 2058 : attempt to index field '?' (a nil value).
Récupérée de « https://cyclopedia.btz.alsace/index.php?title=Shimano_Dura-Ace_Track&oldid=33 »