Modification de Shimano Dura-Ace Track

In 1981 Shimano changed their nomenclature to better represent the components' name. They have done so before but the change from 1981 stuck and is still used as of today.
As such, I am going to try to squish identical groups with different names under the same category.

= Dura-Ace Track (1972-1978) =

Available from 1972<ref>''[https://www.disraeligears.co.uk/site/shimano_bicycle_parts_december_1972_-_page_4.html Link]'', Page 4 of Shimano Bicycle Components (December 1972), disraeligears.co.uk, last accessed : 12/09/2024</ref> to 1978<ref name=DAT78>''[https://www.disraeligears.co.uk/site/shimano_bicycle_system_components_december_1978_-_page_22.html Link]'', Page 22 of Shimano Bicycle Components (December 1978), disraeligears.co.uk, last accessed : 12/09/2024</ref>

=== GA-100<ref name=DAT78></ref> ===

:'''BCD''':
:'''Avail. Crank Lengths''': 165mm, (167.5mm), 170mm, (172,5mm) or 175mm
:'''Pedal Thread''': 9/16"x20
:'''Chain size''': 1/2" x 1/8"
:'''Torque figure''':

=== GB-100<ref name=DAT78></ref> ===

:'''Spindle type''': Square
:'''Spindle Length''': 112mm
:'''Chain Line''': 1/2" x 1/8"
:'''Available Threadings''': BSC, FR or ITA
:'''Torque figure''':
:'''Tool''':

=== HA-300<ref name=DAT78></ref> (previously called H-741 or H-841 for front and rear wheel hubs respectively) ===

:'''No. of Spoke Holes''': 36, 32 or 28
:'''Front Overlock nut dimensions''': 100mm
:'''Rear Overlock nut dimensions''': 110mm or 120mm

=== FA-200<ref name=DAT78></ref> (previously called FR-912>FR-916) ===

:'''Chain size''': 1/2" x 1/8"
:'''Thread''': 1,37"x24TPI
:'''Available Teeth''': 13, 14, 15 or 16 teeth

=== UA-200<ref name=DAT78></ref> (Previously called K-902) ===

:'''Thread Dimensions''': 
:'''Lock Washer type''':
:'''A''':
:'''B''':
:'''C''':
:'''D''':
:'''l1''': 
:'''l2''': 
:'''L''':

=== HS-741 or HS-841 ===

Small Flange Wheel Hubs made unavailable from 1975 onwards.



= Dura-Ace 7000 (or 10) (1977-1981) =

Available from 1977 to 1981<ref name=pitch10>''[https://drive.google.com/file/d/1nhlBEB76WGQO9qj5PtkOyTIPzvBFie6V/view?usp=sharing-1982 Link]'', Page 26 of the 1981 Shimano Bicycle Components, shimano.com, last accessed : 12/09/2024</ref>

This was Shimano's attempt at revolutionising track racing.
"The 10mm pitch system reduces the overall weight and size of the components"

=== FC-7000<ref>''[https://si.shimano.com/en/pdfs/ev/FC-7000-DURA-ACE%2010-0292/EV-FC-7000-DURA-ACE%2010-0292A.pdf Link]'', Exploded view of FC-7000, shimano.com, last accessed : 12/09/2024</ref> (previously called GA-110) ===

:'''BCD''':
:'''Avail. Crank Lengths''': 165mm or 170mm
:'''Pedal Thread''': 9/16"x20
:'''Chain size''': 10mmx3mm
:'''Torque figure''':

=== HB-7020<ref>''[https://si.shimano.com/en/pdfs/ev/HB-7020-DURA-ACE%2010%20F%20&%20R-0293/EV-HB-7020-DURA-ACE%2010%20F%20&%20R-0293A.pdf Link]'', Exploded view of HB-7020, shimano.com, last accessed : 12/09/2024</ref> (previously called HA-310) ===

:'''No. of Spoke Holes''': 36, 32 or 28
:'''Front Overlock nut dimensions''': 100mm
:'''Rear Overlock nut dimensions''': 110mm or 120mm

=== CN-7000<ref name=pitch10></ref> (previously called QA-100) ===

:'''Chain size''': 10mmx3mm

=== SS-7000<ref name=pitch10></ref> (previously called FA-210) ===

:'''Chain size''': 10mmx3mm
:'''Thread''': BC33x24TPI
:'''Available Teeth''': 14, 15 or 16 teeth



= Dura-Ace 7500 (1981-1985)=

Available from 1981<ref name=DAT81>''[https://drive.google.com/file/d/1nhlBEB76WGQO9qj5PtkOyTIPzvBFie6V/view?usp=sharing-1982 Link]'', Page 29 of the 1981 Shimano Bicycle Components, shimano.com, last accessed : 12/09/2024</ref> to 1985

=== FC-7500<ref name="fc7500">''[https://si.shimano.com/en/pdfs/ev/FC-7500-DURA-ACE%20TRACK-0157/EV-FC-7500-DURA-ACE%20TRACK-0157B.pdf Link]'', Exploded view of FC-7500, shimano.com, last accessed : 12/09/2024</ref> ===

:'''BCD''': 144
:'''Avail. Crank Lengths''': 165mm, 167.5mm or 170mm
:'''Pedal Thread''': 9/16"x20 or 14x1,25
:'''Chain size''': 1/2" x 1/8"
:'''Torque figure''':

=== BB-7500<ref name="fc7500"></ref> ===

:'''Spindle type''': Square
:'''Spindle Length''': 107mm (BSC) or 109mm (ITA)
:'''Chain Line''':
:'''Available Threadings''': BSC, FR or ITA
:'''Torque figure''':
:'''Tool''':

=== HB-7520<ref>''[https://si.shimano.com/en/pdfs/ev/HB-7520-0133/EV-HB-7520-0133B.pdf Link]'', Service Instructions for HB-7520, shimano.com, last accessed : 12/09/2024</ref> ===

Large Flange Wheel Hubs.

:'''No. of Spoke Holes''': 36, 32 or 28
:'''Front Overlock nut dimensions''': 100mm
:'''Rear Overlock nut dimensions''': 110mm or 120mm

=== SS-7500<ref name=DAT81></ref> ===

:'''Chain size''': 1/2" x 1/8"
:'''Thread''': 1,37"x24TPI
:'''Available Teeth''': 13, 14, 15 or 16 teeth

=== HP-7500<ref>''[https://si.shimano.com/en/pdfs/ev/HP-7500-DURA-ACE%20TRACK-0102/EV-HP-7500-DURA-ACE%20TRACK-0102B.pdf Link]'', Exploded view of HP-7500, shimano.com, 12/09/2024</ref> ===

:'''Thread Dimensions''': BSC or FR
:'''Lock Washer type''':
:'''A''':
:'''B''':
:'''C''':
:'''D''':
:'''l1''': 21mm
:'''l2''': 11.5mm
:'''L''':

= Dura-Ace 7600 (1986-1998) =

Available from 1986<ref>''[https://www.disraeligears.co.uk/site/complete_line_of_shimano_system_components_january_1986_scan_9.html Link]'', Page 9 of Shimano Bicycle Components (January 1986), disraeligears.co.uk, last accessed :12/09/2024</ref> to 1998<ref>''[https://na.s-tec.shimano.com/s3_assets/filelibrary/Catalogs/1990-2000_TSS_Manuals/1998_Shimano_Dealer_Sales_Support_Manual.pdf Link]'', Page 59 of the 1998 Shimano Bicycle Components, shimano.com, last accessed : 12/09/2024</ref>

=== FC-7600<ref>''[https://si.shimano.com/en/pdfs/si/1620A/SI-1620A-001-00-ENG.pdf Link]'', Service Instructions for FC-7600, shimano.com, last access : 29/04/2024</ref> ===

:'''BCD''': 144
:'''Avail. Crank Lengths''': 165mm, 167.5mm, 170mm, 172.5mm or 175mm
:'''Pedal Thread''': 9/16"x20TPI
:'''Chain size''': 1/2" x 1/8" or 1/2" x 3/32"
:'''Torque figure''': 35-50nm

=== BB-7600<ref>''[https://si.shimano.com/en/pdfs/ev/BB-7400_7600-0729/EV-BB-7400_7600-0729.pdf Link]'', Exploded view of BB-7600, shimano.com, last access : 29/04/2024</ref> ===
Caged ball bearings. Available in BSC, FR or ITA. 109mm

:'''Spindle type''': Square
:'''Spindle Length''': 109mm
:'''Chain Line''':
:'''Available Threadings''': BSC, FR or ITA
:'''Torque figure''':
:'''Tool''':

=== BB-7610<ref>''[https://si.shimano.com/en/pdfs/si/1620A/SI-1620A-001-00-ENG.pdf Link]'', Service Instructions for BB-7610, shimano.com, last access :  29/04/2024</ref> ===
Industrial ball bearings version of BB-7600. Different specifications listed.

:'''Chain Line''': 42.5mm
:'''Available Threading''': BSC, NJS or ITA
:'''Torque figure''': 50-70nm
:'''Tool''': TL-UN74-S

=== HB-7600 (Front<ref>''[https://si.shimano.com/en/pdfs/si/23T0A/SI-23T0A-001-ENG.pdf Link]'', Service Instructions for HB-7600-F, shimano.com, 29/04/2024</ref> and Rear<ref>''[https://si.shimano.com/en/pdfs/si/23U0A/SI-23U0A-001-ENG.pdf Link]'', Service Instructions for HB-7600-R, shimano.com, 29/04/2024</ref>) (Small Flange)===


:'''No. of Spoke Holes''': 36, 32, 28 or 24
:'''Front Overlock nut dimensions''': 100mm
:'''Rear Overlock nut dimensions''': 110mm or 120mm

=== HB-7600 (Front<ref>''[https://si.shimano.com/en/pdfs/si/23T0A/SI-23T0A-001-ENG.pdf Link]'', Service Instructions for HB-7600-F, shimano.com, 29/04/2024</ref> and Rear<ref>''[https://si.shimano.com/en/pdfs/si/23U0A/SI-23U0A-001-ENG.pdf Link]'', Service Instructions for HB-7600-R, shimano.com, 29/04/2024</ref>) (Large Flange)===

:'''No. of Spoke Holes''': 36, 32, 28 or 24
:'''Front Overlock nut dimensions''': 100mm
:'''Rear Overlock nut dimensions''': 110mm or 120mm

=== SS-7600 ===

:'''Chain size''': 1/2" x 1/8" or 1/2" x 3/32"
:'''Thread''': 1,37"x24TPI
:'''Available Teeth''': 13, 14, 15 or 16 teeth

=== HP-7600<ref>''[https://si.shimano.com/en/pdfs/si/N-93/SI-N-93-000-00-ENG.pdf Link]'', Service Instructions for HP-7600, shimano.com,  29/04/2024</ref> ===

:'''Thread Dimensions''': BSC or FR<ref>''[https://si.shimano.com/en/pdfs/ev/HP-7600-0724/EV-HP-7600-0724E.pdf Link]'', Exploded view of HP-7600, shimano.com, 29/04/2024</ref>
:'''Lock Washer type''':
:'''A''': 30mm (JIS) or 30.2mm
:'''B''': 27mm (JIS) or 26.4mm
:'''C''':
:'''D''':
:'''l1''': 21mm
:'''l2''': 11.5mm
:'''L''': H+37.6mm

= Dura-Ace 7700 (2000-2022) =

Available from 2000<ref>''[https://na.s-tec.shimano.com/s3_assets/filelibrary/Catalogs/1990-2000_TSS_Manuals/2000_Shimano_Trade_Sales_Support_Manual.pdf Link]'', Page 107 of the 2000 Shimano Bicycle Components, shimano.com, last accessed : 12/09/2024</ref> to 2022<ref>''[https://web.archive.org/web/20240429160639/https://paul-lange-ukraine.com/images/upload/files_materials/4/68/shimano-2022-en-pdf.pdf Link]'', Page 145 of the 2022 Shimano Bicycle Components, 29/04/2024</ref>

=== FC-7710<ref>''[https://si.shimano.com/en/pdfs/si/16S0A/SI-16S0A-000-ENG.pdf Link]'', Service Instructions for FC-7710, shimano.com,  29/04/2024</ref> ===

:'''BCD''': 144
:'''Avail. Crank Lengths''': 165mm, 167.5mm, 170mm, 172.5mm or 175mm
:'''Pedal Thread''': 9/16"x20TPI
:'''Chain size''': 1/2" x 1/8" or 1/2" x 3/32"
:'''Torque figure''': 35-50nm
:'''Cap Torque figure''': 5-7nm

=== BB-7700<ref>''[https://si.shimano.com/en/pdfs/si/1TG0H/SI-1TG0H-001-ENG.pdf Link]'', Service Instructions for BB-7700, shimano.com, last access : 29/04/2024</ref> ===

Caged ball bearings.

:'''Spindle type''': Octalink
:'''Spindle Length''': 109.5mm
:'''Chain Line''': 42.5mm
:'''Available Threadings''': BSC or ITA
:'''Torque figure''': 50-70nm
:'''Tool''': TL-UN74-S

=== BB-7710<ref>''[https://si.shimano.com/en/pdfs/si/16S0A/SI-16S0A-000-ENG.pdf Link]'', Service Instructions for BB-7710, shimano.com, last access : 29/04/2024</ref> ===

Industrial ball bearings version of BB-7700. Different specifications listed.

:'''Available Threadings''': BSC

=== HB-7710 (Front<ref>''[https://si.shimano.com/en/pdfs/si/23T0A/SI-23T0A-001-ENG.pdf Link]'', Service Instructions for HB-7710-F, shimano.com, 29/04/2024</ref> and Rear<ref>''[https://si.shimano.com/en/pdfs/si/23U0A/SI-23U0A-001-ENG.pdf Link]'', Service Instructions for HB-7710-R, shimano.com, 29/04/2024</ref>)===

Small Flange Wheel Hubs.

:'''No. of Spoke Holes''': 36, 32, 28 or 24
:'''Front Overlock nut dimensions''': 100mm
:'''Rear Overlock nut dimensions''': 110mm or 120mm

=== HP-7410<ref>''[https://si.shimano.com/en/pdfs/si/78A0B/SI-78A0B-000-ENG.PDF Link]'', Service Instructions for HP-7410, shimano.com,  29/04/2024</ref> ===

:'''Thread Dimensions''': BSC or FR
:'''Lock Washer type''': Small Notch or Notch
:'''A''': 30mm (JIS) or 30.2mm
:'''B''': 27mm (JIS) or 26.4mm
:'''C''': 22.3mm
:'''D''': 32mm
:'''l1''': 24.1mm
:'''l2''': 13.5mm
:'''L''': H+37.6mm

= Track-specific Frame Parts =

=== N-103 (12/1972<ref>''[https://www.disraeligears.co.uk/site/shimano_bicycle_parts_december_1972_-_page_30.html Link]'', Page 30 of the December 1972 Shimano Bicycle Components, disraeligears.co.uk, last accessed : 19/09/2024</ref>-02/1973<ref>''[https://www.disraeligears.co.uk/site/shimano_bicycle_parts_february_1973_-_page_30.html Link]'', Page 30 of the February 1973 Shimano Bicycle Components, disraeligears.co.uk, last accessed : 19/09/2024</ref>) ===

Standard Track Fork Ends.

=== NC-100 (1975<ref>''[https://drive.google.com/file/d/1klZnxneGTIOMzsfPRFo4R9tJ0I_bw3Uh/view Link]'', Page 10 of the 1975 Shimano Bicycle Components, shimano.com, last accessed : 19/09/2024</ref>-12/1978<ref name=DAT78></ref>) ===

Low-er end Track Fork Ends.

=== NC-200 (12/1978<ref name=DAT78></ref>-) ===

High-er end Track Fork Ends. Appeared first in a catalog dated December 1978 .

=== FE-SF10 (-1981<ref name=forkends>''[https://drive.google.com/file/d/1nhlBEB76WGQO9qj5PtkOyTIPzvBFie6V/view Link]'', Page 29 of the 1981 Shimano Bicycle Components, , last accessed : 19/09/2024</ref>) ===

Low-er end Track Fork Ends. (Most likely a rename of the NC-100 to meet more appropriately their newly made nomenclature)

=== FE-UF10 (1981<ref name=forkends></ref>-1984<ref>''[https://drive.google.com/file/d/1sLOMGjcPBzkKLw70IicwaOOS7qI4zAAn/view Link]'', Page 144 of the 1984 Shimano Bicycle Components, , last accessed : 19/09/2024</ref>)===

High-er end Track Fork Ends. (Most likely a rename of the NC-200 to meet more appropriately their newly made nomenclature)

= Sources =
<references />