Modification de Shimano Dura-Ace Track

In 1981 Shimano changed their nomenclature to better represent the components' name. They have done so before but the change from 1981 stuck and is still used as of today.
As such, I am going to try to squish identical groups with different names under the same category.

= Dura-Ace Track (1972<ref>{{cite|url= https://www.disraeligears.co.uk/site/shimano_bicycle_parts_december_1972_-_page_4.html |title= Page 4 of Shimano Bicycle Parts December 1972 |publisher= disraeligears.co.uk |access-date= 25/04/2024 |archive-date=  |archive-url=   }}</ref>-1978<ref>{{cite web |url= https://www.disraeligears.co.uk/site/shimano_bicycle_system_components_december_1978_-_page_22.html |title= Page 4 of Shimano Bicycle System Components (December 1978) |publisher= disraeligears.co.uk |access-date= 25/04/2024 |archive-date=  |archive-url= }}</ref>) =

=== GA-100 ===

:'''BCD''': 
:'''Avail. Crank Lengths''': 165mm, (167.5mm), 170mm, (172,5mm) or 175mm
:'''Pedal Thread''': 9/16"x20
:'''Chain size''': 1/2" x 1/8"
:'''Torque figure''': 

=== GB-100 ===

:'''Spindle type''': Square
:'''Spindle Length''': 112mm
:'''Chain Line''': 1/2" x 1/8"
:'''Available Threadings''': BSC, FR or ITA
:'''Torque figure''': 
:'''Tool''': 

=== HA-300 (previously called H-741 or H-841 for front and rear wheel hubs respectively) ===

:'''No. of Spoke Holes''': 36, 32 or 28
:'''Front Overlock nut dimensions''': 100mm
:'''Rear Overlock nut dimensions''': 110mm or 120mm

=== FA-200 (previously called FR-912>FR-916) ===

:'''Chain size''': 1/2" x 1/8"
:'''Thread''': 1,37"x24TPI
:'''Available Teeth''': 13, 14, 15 or 16 teeth

=== UA-200 (Previously called K-902) ===



=== HS-741 or HS-841 ===

Small Flange Wheel Hubs made unavailable from 1975 onwards.



= Dura-Ace 7000 (or 10) (1977-1981) =

This was Shimano's attempt at revolutionising track racing. 
"The 10mm pitch system reduces the overall weight and size of the components"

=== FC-7000 (previously called GA-110) ===

:'''BCD''':
:'''Avail. Crank Lengths''': 165mm or 170mm
:'''Pedal Thread''': 9/16"x20
:'''Chain size''': 10mmx3mm
:'''Torque figure''': 

=== HB-7020 (previously called HA-310) ===

:'''No. of Spoke Holes''': 36, 32 or 28
:'''Front Overlock nut dimensions''': 100mm
:'''Rear Overlock nut dimensions''': 110mm or 120mm

=== CN-7000 (previously called QA-100) ===

:'''Chain size''': 10mmx3mm

=== SS-7000 (previously called FA-210) ===

:'''Chain size''': 10mmx3mm
:'''Thread''': BC33x24TPI
:'''Available Teeth''': 14, 15 or 16 teeth



= Dura-Ace 7500 (1981-1984) =

=== FC-7500 ===

:'''BCD''': 144
:'''Avail. Crank Lengths''': 165mm, 167.5mm or 170mm
:'''Pedal Thread''': 9/16"x20 or 14x1,25
:'''Chain size''': 1/2" x 1/8"
:'''Torque figure''':

=== BB-7500 ===

:'''Spindle type''': Square
:'''Spindle Length''': 107mm (BSC) or 109mm (ITA)
:'''Chain Line''': 
:'''Available Threadings''': BSC, FR or ITA
:'''Torque figure''': 
:'''Tool''': 

=== HB-7520 ===

Large Flange Wheel Hubs.

:'''No. of Spoke Holes''': 36, 32 or 28
:'''Front Overlock nut dimensions''': 100mm
:'''Rear Overlock nut dimensions''': 110mm or 120mm

=== SS-7500 ===

:'''Chain size''': 1/2" x 1/8"
:'''Thread''': 1,37"x24TPI
:'''Available Teeth''': 13, 14, 15 or 16 teeth

=== HP-7500 ===

:'''Thread Dimensions''': BSC or FR
:'''Lock Washer type''': 
:'''A''': 
:'''B''': 
:'''C''': 
:'''D''': 
:'''l1''': 21mm
:'''l2''': 11.5mm
:'''L''': 



= Dura-Ace 7600 (1986-1994) =

=== FC-7600<ref>{{cite web |url= https://si.shimano.com/en/pdfs/si/1620A/SI-1620A-001-00-ENG.pdf |title= Service Instructions for FC-7600 |publisher= shimano.com |access-date= 29/04/2024 |archive-date=  |archive-url= }}</ref> ===

:'''BCD''': 144
:'''Avail. Crank Lengths''': 165mm, 167.5mm, 170mm, 172.5mm or 175mm
:'''Pedal Thread''': 9/16"x20TPI
:'''Chain size''': 1/2" x 1/8" or 1/2" x 3/32"
:'''Torque figure''': 35-50nm

=== BB-7600<ref>{{cite web |url= https://si.shimano.com/en/pdfs/ev/BB-7400_7600-0729/EV-BB-7400_7600-0729.pdf |title= Exploded view of BB-7600 |publisher= shimano.com |access-date= 29/04/2024 |archive-date=  |archive-url= }}</ref> ===
Caged ball bearings. Available in BSC, FR or ITA. 109mm

:'''Spindle type''': Square
:'''Spindle Length''': 109mm
:'''Chain Line''': 
:'''Available Threadings''': BSC, FR or ITA
:'''Torque figure''': 
:'''Tool''': 

=== BB-7610<ref>{{cite web |url= https://si.shimano.com/en/pdfs/si/1620A/SI-1620A-001-00-ENG.pdf |title= Service Instructions for BB-7610 |publisher= shimano.com |access-date= 29/04/2024 |archive-date=  |archive-url= }}</ref> ===
Industrial ball bearings version of BB-7600. Different specifications listed.

:'''Chain Line''': 42.5mm
:'''Available Threading''': BSC, NJS or ITA
:'''Torque figure''': 50-70nm
:'''Tool''': TL-UN74-S

=== HB-7600 (Front<ref>{{cite web |url= https://si.shimano.com/en/pdfs/si/23T0A/SI-23T0A-001-ENG.pdf |title= Service Instructions for HB-7600-F |publisher= shimano.com |access-date= 29/04/2024 |archive-date=  |archive-url=   }}</ref> and Rear<ref>{{cite web |url= https://si.shimano.com/en/pdfs/si/23U0A/SI-23U0A-001-ENG.pdf |title= Service Instructions for HB-7600-R |publisher= shimano.com |access-date= 29/04/2024 |archive-date=  |archive-url=   }}</ref>) (Small Flange)===


:'''No. of Spoke Holes''': 36, 32, 28 or 24
:'''Front Overlock nut dimensions''': 100mm
:'''Rear Overlock nut dimensions''': 110mm or 120mm

=== HB-7600 (Front<ref>{{cite web |url= https://si.shimano.com/en/pdfs/si/23T0A/SI-23T0A-001-ENG.pdf |title= Service Instructions for HB-7600-F |publisher= shimano.com |access-date= 29/04/2024 |archive-date=  |archive-url=   }}</ref> and Rear<ref>{{cite web |url= https://si.shimano.com/en/pdfs/si/23U0A/SI-23U0A-001-ENG.pdf |title= Service Instructions for HB-7600-R |publisher= shimano.com |access-date= 29/04/2024 |archive-date=  |archive-url=   }}</ref>) (Large Flange)===

:'''No. of Spoke Holes''': 36, 32, 28 or 24
:'''Front Overlock nut dimensions''': 100mm
:'''Rear Overlock nut dimensions''': 110mm or 120mm

=== SS-7600 ===

:'''Chain size''': 1/2" x 1/8" or 1/2" x 3/32"
:'''Thread''': 1,37"x24TPI
:'''Available Teeth''': 13, 14, 15 or 16 teeth

=== HP-7600<ref>{{cite web |url= https://si.shimano.com/en/pdfs/si/N-93/SI-N-93-000-00-ENG.pdf |title= Service Instructions for HP-7600 |publisher= shimano.com |access-date= 29/04/2024 |archive-date=  |archive-url= }}</ref> ===

:'''Thread Dimensions''': BSC or FR<ref>{{cite web |url= https://si.shimano.com/en/pdfs/ev/HP-7600-0724/EV-HP-7600-0724E.pdf |title= Exploded view of HP-7600 |publisher= shimano.com |access-date= 29/04/2024 |archive-date=  |archive-url= }}</ref>
:'''Lock Washer type''': 
:'''A''': 30mm (JIS) or 30.2mm
:'''B''': 27mm (JIS) or 26.4mm
:'''C''': 
:'''D''': 
:'''l1''': 21mm
:'''l2''': 11.5mm
:'''L''': H+37.6mm



= Dura-Ace 7700 (2000-2022<ref>{{cite web |archive-url= https://web.archive.org/web/20240429160639/https://paul-lange-ukraine.com/images/upload/files_materials/4/68/shimano-2022-en-pdf.pdf |title= 2022 Shimano Bicycle Components |archive-date= 29/04/2024 }}</ref>) =

=== FC-7710<ref>{{cite web |url= https://si.shimano.com/en/pdfs/si/16S0A/SI-16S0A-000-ENG.pdf |title= Service Instructions for FC-7710 |publisher= shimano.com |access-date= 29/04/2024 |archive-date=  |archive-url= }}</ref> ===

:'''BCD''': 144
:'''Avail. Crank Lengths''': 165mm, 167.5mm, 170mm, 172.5mm or 175mm
:'''Pedal Thread''': 9/16"x20TPI
:'''Chain size''': 1/2" x 1/8" or 1/2" x 3/32"
:'''Torque figure''': 35-50nm
:'''Cap Torque figure''': 5-7nm

=== BB-7700<ref>{{cite web |url= https://si.shimano.com/en/pdfs/si/1TG0H/SI-1TG0H-001-ENG.pdf |title= Service Instructions for BB-7700 |publisher= shimano.com |access-date= 29/04/2024 |archive-date=  |archive-url= }}</ref> ===

Caged ball bearings. 

:'''Spindle type''': Octalink
:'''Spindle Length''': 109.5mm
:'''Chain Line''': 42.5mm
:'''Available Threadings''': BSC or ITA
:'''Torque figure''': 50-70nm
:'''Tool''': TL-UN74-S

=== BB-7710<ref>{{cite web |url= https://si.shimano.com/en/pdfs/si/16S0A/SI-16S0A-000-ENG.pdf |title= Service Instructions for BB-7710 |publisher= shimano.com |access-date= 29/04/2024 |archive-date=  |archive-url= }}</ref> ===

Industrial ball bearings version of BB-7700. Different specifications listed.

:'''Available Threadings''': BSC

=== HB-7710 (Front<ref>{{cite web |url= https://si.shimano.com/en/pdfs/si/23T0A/SI-23T0A-001-ENG.pdf |title= Service Instructions for HB-7710-F |publisher= shimano.com |access-date= 29/04/2024 |archive-date=  |archive-url= }}</ref> and Rear<ref>{{cite web |url= https://si.shimano.com/en/pdfs/si/23U0A/SI-23U0A-001-ENG.pdf |title= Service Instructions for HB-7710-R |publisher= shimano.com |access-date= 29/04/2024 |archive-date=  |archive-url=   }}</ref>)===

Small Flange Wheel Hubs.

:'''No. of Spoke Holes''': 36, 32, 28 or 24
:'''Front Overlock nut dimensions''': 100mm
:'''Rear Overlock nut dimensions''': 110mm or 120mm

=== HP-7410<ref>{{cite web |url= https://si.shimano.com/en/pdfs/si/78A0B/SI-78A0B-000-ENG.PDF |title= Service Instructions for HP-7410 |publisher= shimano.com |access-date= 29/04/2024 |archive-date=  |archive-url= }}</ref> ===

:'''Thread Dimensions''': BSC or FR
:'''Lock Washer type''': Small Notch or Notch
:'''A''': 30mm (JIS) or 30.2mm
:'''B''': 27mm (JIS) or 26.4mm
:'''C''': 22.3mm
:'''D''': 32mm
:'''l1''': 24.1mm
:'''l2''': 13.5mm
:'''L''': H+37.6mm

= Track-specific Frame Parts =

=== N-103 (12/1972-1974) ===

Standard Track Fork Ends.

=== NC-100 (1975-1981) ===

Low-er end Track Fork Ends. 

=== NC-200 (12/1978-1981) ===

High-er end Track Fork Ends. Appeared first in a catalog dated December 1978 .

=== FE-SF10 (1981) ===

Low-er end Track Fork Ends. (Most likely a rename of the NC-100 to meet more appropriately their newly made nomenclature)

=== FE-UF10 (1981)===

High-er end Track Fork Ends. (Most likely a rename of the NC-200 to meet more appropriately their newly made nomenclature)

= Sources =